jumpToMain
Repair kit for fuel lines 4.07373.10.0

Repair kit for fuel lines

Pierburg | Motorservice

If the fuel line is leaking: How do you repair the fuel line? Where do I get an SAE plug?
You can find help with a rusted through petrol line here.

Using the repair kit, item 4.07373.10.0, smaller defective spots on fuel lines can be repaired quickly and efficiently:

  • Rusted-through areas, e.g. on steel tubes
  • Embrittled areas on plastic tubes
  • Kinked plastic tubes
  • Broken plugs, e.g. from disassembly during filter replacement
  • Suitable for steel or plastic tubes with an outside diameter of 8 or 10 mm
  • Junctions of the different materials are possible (plastic tube – steel tube; rubber hose – steel tube; plastic tube – rubber hose)
3276
Repair kit for fuel lines 4.07373.10.0

SCOPE OF SUPPLY

The most common connections for fuel filters, fuel pump connectors and fuel pumps.

OPERATING PRESSURE

Max. 5 bar absolute

3277
3278
Application examples

REFILL PACKS

Individual parts from the repair kit can also be purchased as refill packs (see rear).

NOTE:

18955

Due to the use of pipe connections or sleeves, the flow cross section may be reduced and therefore the flow rate may be decreased at the repaired area.

Please observe the safety regulations for handling fuels when using the repair kit.

THE FOLLOWING REFILL PACKS ARE AVAILABLE FOR THE REPAIR KIT:

3279
4.07373.11.0 4.07373.12.0 4.07373.13.0 4.07373.14.0 4.07373.15.0 4.07373.16.0 4.07373.17.0 4.07373.18.0 4.07373.39.0 4.07373.40.0 4.07373.41.0 4.07373.42.0 4.07373.43.0 4.07373.44.0 4.07373.45.0
Taking responsibility in a changing world
Contact

Headquarter

Wilhelm-Maybach-Straße 14-18

74196 Neuenstadt

Germany

Phone: +49 (0) 7139 / 9376 - 33 33

Fax: +49 (0) 7139 / 9376 - 28 64

info@ms-motorservice.com
© 2024 MS Motorservice International GmbH