jumpToMain
Free jet centrifuge

Oil filters in a combination system

KS | Kolbenschmidt | Motorservice

What are the advantages of combining bypass filters with full flow filters? What is a free jet centrifuge? How is it constructed? How does the oil centrifuge filter work? You can find information here.

If bypass filters are used in combination with full flow filters, a very effective filtration is achieved: The finest particulates, which are allowed through by the full flow filter, are filtered out by the bypass filter. The bypass filter ensures extremely thorough cleaning with a high level of separation. In utility vehicles and construction machinery, the open jet centrifuge (oil centrifuge filter) is primarily used as a bypass filter. The oil, which is diverted from the main duct into a bypass duct, flows through the hollow shaft of the impeller into the interior of the filter via suitably arranged holes. Specially positioned discharge nozzles in the floor allow the oil back out of the centrifuge.

This process releases recoil forces that cause the impeller to rotate. Here, speeds of 4000 to 8000 rpm can be reached, depending on the pressure and temperature. The centrifugal forces generated during this rotation fling the dirtparticles in the oil onto the inside wall of the impeller. They remain stuck there until the centrifuge is replaced at the next specified maintenance interval.

16709
Oil filters
16707
Free jet centrifuge

1 Oil outlet holes
2 Bearing
3 Impeller
4 Dirt layer
5 Bypass duct
6 Full flow filter
7 Oil flow
8 Hub with specially positioned discharge nozzles
9 Hollow shaft

1 Oil cooler
2 Valve
3 Full flow filter
4 Overflow valve
5 Lubricating point
6 Bypass filter
7 Oil pan
8 Pressure relief valve
9 Oil pump

16710
Oil filter in the combination system

This might also interest you

Related articles

BF Engine Parts Motor Parçalari Diş Tic. Ve Paz. San. Ve Tic. Ltd. Şti.

Selvili Sokak No 2

Helis Beyaz Ofis İş Merkezi / A Blok - No 311

Yeşilbağlar Mahallesi

34893 Istanbul

Turkey

Phone: +90 216 488 18 70

Fax: +90 216 488 18 72

Erdinc.Oerencik@de.kspg.com

Website

© 2024 BF Engine Parts L.C