jumpToMain
1 Housing plug 2 Valve chamber 3 Valve head

BMW 1.5/1.6/2.0 l diesel EGR valve

Installation only in energised state

Pierburg | Motorservice
Back to search

Information on the product

Problems when replacing the BMW EGR valve.
BMW 1.5/1.6/2.0 l diesel: The EGR valve doesn't fit or can only be installed using force.
Find our solution here.

Vehicles: BMW 1.5/1.6/2.0 l diesel Product: Electromotive EGR valve
Model series Pierburg no. Replacement for Ref. no.*
F10, F11, F20, F21, F22, F23, F25, F26, F30, F31, F32, F36, F45, F46,
F82, F83
7.04493.17.0 7.04493.11.0 11718513132
The electromotive EGR valve 7.04493.17.0 may only be installed in an energised state otherwise it may become damaged during installation.
  • Before mounting, connect the plug-in connection of the electrical connection to the housing plug (1) on the EGR valve.
  • Connect a suitable engine tester to the vehicle.
  • Choose the "Replace EGR valve" service function. The EGR valve is then supplied with power. This will be apparent from the fact that the valve head (3) is drawn into the valve chamber (2) slightly.
  • Only now may the EGR valve be installed into the EGR cooler module.

When de-energised, the transmission gearing in the EGR valve is in its end position. If a force is applied across the valve head (3), as happens during installation, the transmission gearing could be damaged.
3260
1 Housing plug 2 Valve chamber 3 Valve head
3261
Assignment of the housing plugs on the EGR valve 1 Engine negative 2 Engine positive 3 Sensor negative 4 Sensor earth 5 Sensor signal
* The reference numbers given are for comparison purposes only and must not be used on invoices to the consumer.

This might also interest you

Related articles

BF Engine Parts Motor Parçalari Diş Tic. Ve Paz. San. Ve Tic. Ltd. Şti.

Selvili Sokak No 2

Helis Beyaz Ofis İş Merkezi / A Blok - No 311

Yeşilbağlar Mahallesi

34893 Istanbul

Turkey

Phone: +90 216 488 18 70

Fax: +90 216 488 18 72

Erdinc.Oerencik@de.kspg.com

Website

© 2024 BF Engine Parts L.C