jumpToMain
3249

Adaptation to engine management

Various Pierburg components must be “learnt”

Pierburg | Motorservice
Back to search

Information on diagnostics

High idling after installation? New part on the engine control unit is not working or the new component is already faulty? What does "basic settings" mean on the tester?
We will tell you what you should bear in mind when installing a new component.

Modern vehicles are partly equipped with highly complex electronic components for which in the engine management controller highly specific characteristics data must be saved.
When replacing such a component against a new one, the engine management controller must first be made to “learn” the corresponding characteristics. If this is not done, then the result are typical customer complaints like “new component doesn’t work” or, for example, “higher idle speed after installation”.

Affected by this are among other things:
  • air mass sensors,
  • stepper motors,
  • throttle bodies,
  • idle speed devices and
  • electric EGR valves.
Step motor: idling actuator | Pierburg | Motorservice
Step motor: idling actuator
3254
Throttle body “drive-by wire”
Electric drive module (swirl flap actuator) | Pierburg | Motorservice
Electric drive module (swirl flap actuator)
Air mass sensor | Pierburg | Motorservice
Air mass sensor
Electric EGR valve | Pierburg | Motorservice
Electric EGR valve
When installing a new component, as a rule, observe the following:
  • will according to the manufacturer’s information be an adaptation required?
  • does the engine tester provide in its programme for the specific component (“default setting” or “adaptation”)?
  • is there a special Pierburg Service Information document which covers the specific component?

This might also interest you

On-Board Diagnostics Part 1: Introduction

Related articles

Taking responsibility in a changing world
Contact

BF Engine Parts Motor Parçalari Diş Tic. Ve Paz. San. Ve Tic. Ltd. Şti.

Selvili Sokak No 2

Helis Beyaz Ofis İş Merkezi / A Blok - No 311

Yeşilbağlar Mahallesi

34893 Istanbul

Turkey

Phone: +90 216 488 18 70

Fax: +90 216 488 18 72

Erdinc.Oerencik@de.kspg.com

Website

© 2024 BF Engine Parts L.C