jumpToMain
3786

Danger of breakage: Install water pumps from

Audi, Seat, Škoda and VW correctly

Pierburg | Motorservice

What is the correct way to install water pumps? Can the gaskets on the water pumps be oiled? Why do water pumps break? What are common causes of damage to water pumps? This video tells you all you need to know.

Water pump damage symptoms

Typical damage to the water pumps in question are visible breaks or leakages in the area of the flange seal. The most frequent cause is that the gasket has become contaminated with oil. This is because when the gasket comes into contact with oil, it can swell and break the housing. Therefore, you should never oil the gasket. The area around the installation location and the coolant agent must also be free from impurities from oil.

Another possible cause is that the screw connection sequence was not performed in the correct order and the tightening torque was not complied with.
Tips for installation:

  • do not remove the yellow protective cap from the water pump until after installation
  • do not use additional sealant
  • observe the mounting instructions
3787
3786

This might also interest you

Danger of breakage: Install water pumps from Audi, Seat, Škoda and VW correctly

Related articles

Maslak Mh. Büyükdere Cd. No: 237

Noramin İş Merkezi Kat: 1 / 118

34398 Sarıyer - Istanbul

Turkey

Phone: +90 (212) 285 42 65

Fax: +90 (212) 285 42 68

info@ms-motorservice.com.tr

Website

© 2024 MS Motorservice İstanbul Dış Ticaret ve Pazarlama A.Ş.