The design of the vacuum pump 7.24807.20.0, a single-vane pump for rotating drive, has been revised. This means that it also differs visually from its predecessor.
These changes may cause confusion when dismantling the old vacuum pump if the old model is compared directly with the new design.
These modifications to the design have no impact on the function, however. All product assignments remain unchanged.
The most obvious changes are:
- Coupling to the drive, Fig. 1 and 2
- Oil supply connection, Fig. 1 and 2
- Sealing ring and type of gasket, Fig. 1 and 2
- Connection for the vacuum hose, Fig. 3 and 4