Information on the product

Adapter cable for regulating throttles

for Boxer, Daily, Ducato and Jumper

Why does the plug not fit the throttle valve? Is the assignment correct? Problems with 7523D and 7497D.

Vehicles: Citroën, Fiat/Iveco, Peugeot

ModelAdapter cablePIERBURG regulating
throttle
Replacement
for
Ref. no.*
Fiat Ducato III 3.0 D/Iveco Daily IV 3.0 D4.07360.49.0


7.01754.10.0


7523D
7.01754.07.0


504105594; 504264089; 504345917;
71724299; 71724302
Peugeot Boxer II 3.0 HDi163638
Citroën Jumper II 3.0 HDi163671; 163676
Fiat Ducato III 2.3 D/Iveco Daily IV 2.3 D4.07360.52.07.03703.49.07497D504099669; 504345920; 504351131;
71724304; 71724306

* The reference numbers given are for comparison purposes only and must not be used on invoices to the consumer.

 

For the diesel vehicles listed above, regulating throttles with the reference numbers 7523D and 7497D were installed at the start of series production. During series production (from 2009), these regulating throttles were replaced with Pierburg regulating throttles, among others.

With the adapter cables 4.07360.49.0 and 4.07360.52.0, regulating throttles installed before 2009 can also be replaced with Pierburg regulating throttles.


Note:
The relevant adapter cable is required when replacing the installed regulating throttles 7523D and 7497D with Pierburg regulating throttles (see table).

This might also interest you