Kolbenschmidt Plastic Gauge

Engine measuring tape

KS | Kolbenschmidt | Motorservice

Measurement of bearing clearances and gap dimensions with an open engine. Check bearing clearances on the crankshaft – but how?

Plastic Gauge provides a simple but precise method for the measurement of clearance between fitted surfaces. It is particularly useful for measuring clearance in split bearings or in situations where a feeler gauge cannot be inserted.
Instruction: determine of the bearing clearance
After removing the engine sump cover remove also the bearing cap. Clean the exposed surface of the journal and bearing shell. Trim a length of Plastic Gauge to fit across the journal. Apply a small quantity of grease to the journal to keep the measuring stripe in position. Apply silicone spray on the shell surface to prevent sticking the measuring stripe on the bearing surface while squeezing the stripe. Assemble the bearing cap and tighten the retaining screws to the manufacturer’s recommended tightening torque.
Don’t rotate the crankshaft.

Now remove the shell once again by unscrewing the retaining screws to reveal the Plastic Gauge which will have been spread across the bearing surface as a stripe or band. Match the width of the Plastic Gauge stripe against the card gauge supplied and read off the bearing clearance. It is advisable to remove the Plastic Gauge stripe with a clean oily cloth before assembling the bearing cap.

Other Applications:
Plastic Gauge may be used to detect high spots in cylinder heads, pipe flanges, etc.
It is useful in production, inspection and servicing.

Measuring range:
0,025 - 0,175 mm
0,001 - 0,007 inch

Contents of Pack:
10 plastic measuring gauges
1 Measurement scale
1 Detailed instructions

Product Kolbenschmidt No.
Plastic Gauge 12 00004 17 001

This might also interest you

Measure bearing clearances with the KOLBENSCHMIDT PLASTIC GAUGE

No. 699. ShenGui Road, Minhang District

Room 302, Building E

201106 Shanghai


Phone: +86 (0)21 3405 6800



© 2024 MS Motorservice Asia Pacific Co., Ltd.